Friday 4 May 2012

Yamaha  VX  Cruiser


Standard Features

The Powerplant
  • The VX Cruiser is powered by a Yamaha MR-1® four-stroke engine.
    This is a compact, ultra-lightweight, four-cylinder, 1052cc, DOHC, 20-valve, liquid-cooled engine for class-leading performance.

  • Electronic Fuel Injection (EFI):
    Delivers smooth, high power output with low fuel consumption and low exhaust emissions.

  • Specially Designed, One-piece Cylinder and Crankcase Assembly:
    Provides tremendous engine rigidity that's lighter and stiffer than two-piece designs.

  • Slant Detection Switch:
    Electronic switch stops engine and oil pumps immediately if watercraft becomes overturned, protecting motor from water ingestion.

  • Dry Sump Lubrication: Uses two engine oil pumps to deliver lubricating oil to each moving part with water-jacketed sump and oil backflow protection.

  • Corrosion Protection System:
    Sacrificial zinc anodes protect the engine from harmful galvanic corrosion. Stainless steel fasteners (nuts, bolts, hardware) provide a long service life.

  • Electronically Controlled, Variable Ignition Timing:
    For exact ignition advance control at all throttle positions and RPMs.
The Jet Pump Propulsion System
  • The VX pump design:
    One of the most efficient pump configurations ever, increasing stream velocity and thrust while decreasing cavitation and prop spin.

  • Reverse:
    Allows the watercraft to be backed up off a trailer or out of tight spots where you cannot turn around easily.

  • Stainless Steel Impeller Housing Liner:
    For high durability, the liner maintains accurate clearance tolerances between the impeller and the housing.

  • High Flow Intake Duct and Grate: 
    The dynamic shape of these items directs water flow into the pump for better thrust, performance and hook up.

  • Cooling Water Intake Filter:
    Filters out harmful debris that could cause blockage of important cooling water passages.

  • Pumps are Manufactured with YDC30:
    A combination of zinc and copper alloys, developed by Yamaha marine engineers, that offers excellent corrosion protection.
The Ultra-Lightweight, High Strength Hull and Deck
  • The VX Cruiser hull :
    Designed to be light and strong.

  • Progressive, Stepper Draft V-Hull with Integrated Bow Spray Guard:
    Provides excellent maneuverability, handling and comfort.

  • Sponson Design:
    Provides added straight-line comfort and an improved two-up and three-up riding experience.
Additional Features:
  • Cruiser Seat:
    Adds comfort and support for both passenger and driver.

  • Extra Large Boarding Platform with Reboarding Step:
    Provides a stable platform for reboarding.

  • Multi-function Electronic Information Center:
    Provides the operator a quick read on speed, RPM, fuel level, low fuel warning, low oil pressure warning, overheat warning, hour meter, check engine light with self diagnostic function.

  • Industry's First Remote Controlled Transmitter:
    With the touch of a button on Yamaha's innovative remote-controlled transmitter, you can activate and deactivate the VX digital security system and Low RPM Mode from up to 30 feet away.

  • FX Cruiser HO The personal watercraft industry's first fuel saving feature,
    Low RPM can reduce fuel consumption by up to 26% based on average annual use.

  • Dual Concave Mirrors:
    Automotive style and convenience.

  • 19 Gallons of Total Storage:
    Includes a large bow storage locker and glove box.

  • Glove Box with Self-draining
    Beverage Holders

  • Finger Throttle Lever:
    Provides added comfort while reducing hand fatigue.

  • Yamaha's Trademarked Visibility Spout®:
    A waterspout from the rear of the craft that improves the watercraft's conspicuity.








Yamaha  FX  Cruiser  HO


Standard Features

The Powerplant
  • The FX Cruiser HO is powered by a 1.8 liter, high output Yamaha Marine Engine.
    This 1812cc engine, which is purpose-built for the marine environment, is the largest displacement engine ever installed in a personal watercraft. It is also the only engine in the high-performance, four-stroke category optimized to run on the least expensive Regular Unleaded fuel.

  • Electronic Fuel Injection (EFI):
    Throttle position sensor (TPS) and intake air pressure and air temperature sensors supply the optimum air/fuel mixture. The results are a smooth, high power output with low fuel consumption and low exhaust emissions.

  • Specially Designed, One-piece Cylinder and Crankcase Assembly:
    Provides tremendous engine rigidity that's lighter and stiffer than two-piece designs.

  • Slant Detection Switch:
    Electronic switch stops engine and oil pumps immediately if watercraft becomes overturned, protecting motor from unwanted water ingestion.

  • High Volume Intake Box:
    With water repellent air filter and flame arrestors.

  • SAWS (Scavenger Assist Wet Sump): Equipped with a high-performance, compact gas-liquid separator, this engine uses Yamaha's unique ultra compact lubrication system and the oil pan structure.

  • Thermostatic Cooling System:
    Water flow through the engine is automatically controlled through a thermostat sensor.

  • Corrosion Protection System:
    Sacrificial zinc anodes protect the engine from harmful galvanic corrosion. Stainless steel fasteners (nuts, bolts, hardware) provide a long service life. Cylinders, cases and heads are all treated with a durable oxide coating to form a barrier between corrosion and expensive engine parts.

  • Electronically Controlled, Variable Ignition Timing:
    For exact ignition advance control at all throttle positions and RPMs.

  • Direct Ignition:
    For more efficient combustion.
Yamaha High Pressure Pump
  • The FX Cruiser HO's 155mm hyper-flow jet pump propulsion system:
    The three-blade stainless steel impeller is designed to maximize water flow for high performance. The FX Cruiser HO pump configuration provides excellent hook-up and smooth acceleration.

  • The industry's only Reverse with Traction Control technology:
    Maintains the perfect RPM to provide the optimal speed for effectively maneuvering when the watercraft is in reverse.

  • Quick Shift Trim System (Q.S.T.S.):
    Mechanically operated, this system offers instant change in the attitude of the watercraft while underway allowing for tighter turns or quicker acceleration on plane, as the rider prefers. Q.S.T.S. offers 24 degrees of total trim range.

  • Stainless Steel Impeller Housing Liner:
    For high durability, the liner maintains accurate clearance tolerances between the impeller and the housing.

  • High Flow Intake Duct and Grate:
    The dynamic shape of these items directs water flow into the pump for better thrust, performance and hook up.

  • Pumps are Manufactured with YDC30:
    A combination of zinc and copper alloys, developed by Yamaha marine engineers, that offers excellent corrosion protection.
The NanoXcel Hull and Deck:
  • The FX Cruiser HO features the world's first hulls and decks manufactured through the use of cutting edge nanotechnology.
    Yamaha's NanoXcel ultra-lightweight, high strength material reduces the weight of the hull, deck and liner by 25% and provides performance gains in acceleration, fuel savings, top speed and handling. Additionally, the NanoXcel material offers a shinier, gem-like finish which reduces surface tension on the water, providing a more nimble, responsive ride.

  • Progressive, Stepped Draft V-Hull with Integrated Bow Spray Guard:
    Provides excellent maneuverability, handling and comfort.

  • Sponson Design:
    Provides added straight-line comfort and an improved two-up and three-up riding experience.
Additional Features:
  • Yamaha's exclusive Cruise Assist:
    The industry's first system that allows the driver to set and hold a particular engine speed while maintaining a comfortable riding position with the throttle. Once the speed is set, the driver can increase or decrease the speed through the simple push of a button. When the throttle is disengaged the system shuts off.

  • Yamaha's No Wake Mode:
    Makes cruising through no-wake zones a breeze. Once engaged, the no-wake mode moves the engine's RPMs to an optimal speed, approximately 5 mph, for efficiently navigating through a no-wake zone. Once through, the driver simply applies throttle and the no-wake mode is released.

  • Yamaha Cruiser® Seat: Yamaha's innovative Cruiser® seat provides excellent comfort for the driver and passengers.

  • Four-step Adjustable Tilt Steering System: Allows the rider to adjust the steering column angle from 55 degrees to 35 degrees.

  • Multi-function Electronic Information Center:
    Provides the operator a quick read on speed, RPM, fuel level, low fuel warning, low oil pressure warning, battery voltage, overheat warning, hour meter, check engine light with self-diagnostic function and the industry's only audible warning system.

  • Industry's First Remote Controlled Transmitter:
    With the touch of a button on Yamaha's innovative remote controlled transmitter, you can activate and deactivate the FX Cruiser HO's digital security system and Low RPM Mode from up to 30 feet away.

  • Low RPM Mode:
    The personal watercraft industry's first fuel saving feature, Low RPM can reduce fuel consumption by up to 26% based on average annual use.

  • Yamaha Security System:
    This security system that can be activated with the touch of a button ensures that no one starts the FX Cruiser HO without your permission.

  • 23 Gallons of Total Storage, including a glove box and watertight storage on the dash

  • Extra Large Boarding Platform with Retractable Reboarding Step:
    Provides a stable area for reboarding.

  • Dual Mirrors: Automotive style and convenience.

  • Yamaha's Trademarked Visibility Spout®:
    A waterspout from the rear of the craft that improves the watercraft's conspicuity.








Yamaha  FX  HO


Standard Features

The Powerplant
  • The FX ? HO is powered by a 1.8 liter high output Yamaha Marine Engine.
    This 1812cc engine, which is purpose-built for the marine environment, is the largest displacement engine ever installed in a personal watercraft. It is also the only engine in the high-performance, four-stroke category optimized to run on the least expensive Regular Unleaded fuel.

  • Electronic Fuel Injection (EFI): 
    Throttle position sensor (TPS) and intake air pressure and air temperature sensors supply the optimum air/fuel mixture. The results are a smooth, high power output with low fuel consumption and low exhaust emissions.

  • Specially Designed, One-piece Cylinder and Crankcase Assembly:
    Provides tremendous engine rigidity that's lighter and stiffer than two-piece designs.

  • Slant Detection Switch:
    Electronic switch stops engine and oil pumps immediately if watercraft becomes overturned, protecting motor from unwanted water ingestion.

  • High Volume Intake Box:
    With water repellent air filter and flame arrestors.

  • SAWS (Scavenger Assist Wet Sump):
    Equipped with a high-performance, compact gas-liquid separator, this engine uses Yamaha's unique ultra compact lubrication system and the oil pan structure.

  • Corrosion Protection System:
    Sacrificial zinc anodes protect the engine from harmful galvanic corrosion. Stainless steel fasteners (nuts, bolts, hardware) provide a long service life. Cylinders, cases and heads are all treated with a durable oxide coating to form a barrier between corrosion and expensive engine parts.

  • Electronically Controlled, Variable Ignition Timing:
    For exact ignition advance control at all throttle positions and RPMs.

  • Direct Ignition:
    For more efficient combustion.
Yamaha High Pressure Pump
  • The FX HO's 155mm hyper-flow jet pump propulsion system with three-blade stainless steel impeller:
    Designed to maximize water flow for high performance. The FX HO pump configuration provides excellent hook-up and smooth acceleration.

  • The industry's only Reverse with Traction Control technology:
    Maintains the perfect RPM to provide the optimal speed for effectively maneuvering when the watercraft is in reverse.

  • Quick Shift Trim System (Q.S.T.S.):
    Mechanically operated, this system offers instant change in the attitude of the watercraft while underway allowing for tighter turns or quicker acceleration on plane, as the rider prefers. Q.S.T.S. offers 24 degrees of total trim range.

  • Stainless Steel Impeller Housing Liner:
    For high durability, the liner maintains accurate clearance tolerances between the impeller and the housing.

  • High Flow Intake Duct and Grate:
    The dynamic shape of these items directs water flow into the pump for better thrust, performance and hook up.

  • Pumps are Manufactured with YDC30:
    A combination of zinc and copper alloys, developed by Yamaha marine engineers, that offers excellent corrosion protection.
The NanoXcel Hull and Deck:
  • The FX HO features the world's first hulls and decks manufactured through the use of cutting edge nanotechnology.
    Yamaha's NanoXcel ultra-lightweight, high strength material reduces the weight of the hull, deck and liner by 25% and provides performance gains in acceleration, fuel reduction, top speed and handling. Additionally, the NanoXcel material offers a shinier, gem-like finish which reduces surface tension on the water, providing a more nimble, responsive ride.

  • Progressive, Stepped Draft V-Hull with Integrated Bow Spray Guard:
    Provides excellent maneuverability, handling and comfort.

  • Sponson Design:
    Provides added straight-line comfort and an improved two-up and three-up riding experience.
Additional Features:
  • Yamaha's exclusive Cruise Assist
    is the industry's first system that allows the driver to set and hold a particular engine speed while maintaining a comfortable riding position with the throttle. Once the speed is set, the driver can increase or decrease the speed through the simple push of a button. When the throttle is disengaged the system shuts off.

  • Yamaha's No Wake Mode makes cruising through no-wake zones a breeze.
    Once engaged, the no-wake mode moves the engine's RPMs to an optimal speed, approximately 5 mph, for efficiently navigating through a no-wake zone. Once through, the driver simply applies throttle and the no-wake mode is released.

  • Four-step Adjustable Tilt Steering System:
    Allows the rider to adjust the steering column angle from 55 degrees to 35 degrees.

  • Multi-function Electronic Information Center:
    Provides the operator a quick read on speed, RPM, fuel level, low fuel warning, low oil pressure warning, battery voltage, overheat warning, hour meter, check engine light with self-diagnostic function and the industry's only audible warning system.

  • Industry's First Remote Controlled Transmitter:
    With the touch of a button on Yamaha's innovative remote controlled transmitter, you can activate and deactivate the FX HO's digital security system and Low RPM Mode from up to 30 feet away.

  • Low RPM Mode?:
    The personal watercraft industry's first fuel saving feature, Low RPM can reduce fuel consumption by up to 26% based on average annual use.

  • Yamaha Security System: This security system that can be activated with the touch of a button ensures that no one starts the FX HO without your permission.

  • 23 Gallons of Total Storage,
    including a glove box and water tight compartment on dash.

  • Extra Large Boarding Platform with Retractable Reboarding Step:Provides a stable area for reboarding.

  • Dual Mirrors:
    Automotive style and convenience.

  • Finger Throttle Lever:
    Provides added comfort while reducing hand fatigue.

  • Yamaha's Trademarked Visibility Spout®:
    A waterspout from the rear of the craft that improves the watercraft's conspicuity.

To Know More Yamaha FX HO Dealer India 







Yamaha  VXR


Standard Features

The Powerplant
  • The Yamaha VXR is powered by a 1.8 liter high output Yamaha Marine Engine.
    This 1812cc engine, which is purpose-built for the marine environment, is the largest displacement engine ever installed in a personal watercraft. It is also the only engine in the high-performance, four-stroke category optimized to run on the least expensive Regular Unleaded fuel.

  • Electronic Fuel Injection (EFI):
    Throttle position sensor (TPS), intake air pressure and air temperature sensors supply the optimum air/fuel mixture. The results are a smooth, high power output with low fuel consumption and low exhaust emissions.

  • Specially Designed, One-piece Cylinder and Crankcase Assembly:
    Provides tremendous engine rigidity that's lighter and stiffer than two-piece designs.

  • Slant Detection Switch:
    Electronic switch stops engine and oil pumps immediately if watercraft becomes overturned, protecting motor from unwanted water ingestion.

  • High Volume Intake Box:
    With water repellent air filter and flame arrestors.

  • SAWS (Scavenger Assist Wet Sump):
    Equipped with a high-performance, compact gas-liquid separator, this engine uses Yamaha's unique ultra compact lubrication system and oil pan structure.

  • Corrosion Protection System:
    Sacrificial zinc anodes protect the engine from harmful galvanic corrosion. Stainless steel fasteners (nuts, bolts, hardware) provide a long service life. Cylinders, cases and heads are all treated with a durable oxide coating to form a barrier between corrosion and expensive engine parts.

  • Electronically Controlled, Variable Ignition Timing: For exact ignition advance control at all throttle positions and RPMs.

  • Direct Ignition:
    For more efficient combustion.
The Jet Pump Propulsion System
  • The Yamaha VXR’s 155mm hyper-flow jet pump propulsion system with three-blade stainless steel impeller:
    Designed to maximize water flow for high performance. The VXR’s pump configuration provides excellent hook-up and smooth acceleration.

  • Stainless Steel Impeller Housing Liner:
    For high durability, the liner maintains accurate clearance tolerances between the impeller and the housing.

  • High Flow Intake Duct and Grate:
    The dynamic shape of these items directs water flow into the pump for better thrust, performance and hook up.

  • Pumps are Manufactured with YDC30:
    A combination of zinc and copper alloys, developed by Yamaha marine engineers, that offers excellent corrosion protection.
The NanoXcel Hull and Deck
  • The Yamaha VXR features the world’s first hulls and decks manufactured through the use of cutting edge nanotechnology.
    Yamaha’s NanoXcel ultra-lightweight, high strength material reduces the weight of the hull, deck and liner by 25% and provides performance gains in acceleration, fuel reduction, top speed and handling. Additionally, the NanoXcel material offers a shinier, gem-like finish which reduces surface tension on the water, providing a more nimble, responsive ride.

  • Progressive, Stepped Draft V-Hull with Integrated Bow Spray Guard:
    Provides excellent maneuverability, handling and comfort.

  • Performance Sponson Design:
    Provides added straight-line comfort and an improved two-up and three-up riding experience.
Additional Features:
  • Multi-function Electronic Information Center:
    Provides the operator a quick read on speed, RPM, fuel level, low fuel warning, low oil pressure warning, overheat warning, hour meter, check engine light with self diagnostic function.

  • Industry's First Remote Controlled Transmitter:
    With the touch of a button on Yamaha's innovative remote-controlled transmitter, you can activate and deactivate the VXR’s digital security system and Low RPM Mode from up to 30 feet away.

  • Low RPM Mode™:
    The personal watercraft industry’s first fuel saving feature, Low RPM can reduce fuel consumption by up to 26% based on average annual use.

  • Yamaha Security System:
    This security system that can be activated with the touch of a button ensures that no one starts the VXR without your permission.

  • Dual Concave Mirrors:
    Automotive style and convenience.

  • 15 Gallons of Total Storage:
    Includes a large bow storage locker and glove box.

  • Comfortable One-piece Seat:
    Ergonomically-designed and contoured for added support, this sport bolstered, two tone, textured seat is easily removed for quick access to the engine compartment.

  • Extra Large Boarding Platform with Retractable Reboarding Step:
    Provides a stable platform for reboarding.

  • Glove Box with Insulated Beverage Holders.
  • Finger Throttle Lever:
    Provides added comfort while reducing hand fatigue.

  • Yamaha's Trademarked Visibility Spout®:
    A waterspout from the rear of the craft that improves the watercraft's conspicuity.

To Know More Yamaha VXR Dealer India 







Yamaha  FZS


Standard Features

The Powerplant
  • The FZS is powered by a 1.8 liter, supercharged, super high output Yamaha Marine Engine. This 1812cc engine, which is purpose-built for the marine environment, is the largest displacement engine ever installed in a personal watercraft. It is also the only engine in the high-performance, four-stroke category optimized to run on the least expensive Regular Unleaded fuel.
  • Electronic Fuel Injection (EFI): Throttle position sensor (TPS) and intake air pressure and air temperature sensors supply the optimum air/fuel mixture. The results are a smooth, high power output with low fuel consumption and low exhaust emissions.
  • Specially Designed, One-piece Cylinder and Crankcase Assembly:Provides tremendous engine rigidity that's lighter and stiffer than two-piece designs.
  • Slant Detection Switch: Electronic switch stops engine and oil pumps immediately if watercraft becomes overturned, protecting motor from unwanted water ingestion.
  • High Volume Intake Box: With water repellent air filter and flame arrestors.
  • SAWS (Scavenger Assist Wet Sump): Equipped with a high-performance, compact gas-liquid separator, this engine uses Yamaha's unique ultra compact lubrication system and the oil pan structure.
  • Thermostatic Cooling System: Water flow through the engine is automatically controlled through a thermostat sensor.
  • Corrosion Protection System: Sacrificial zinc anodes protect the engine from harmful galvanic corrosion. Stainless steel fasteners (nuts, bolts, hardware) provide a long service life. Cylinders, cases and heads are all treated with a durable oxide coating to form a barrier between corrosion and expensive engine parts.
  • Electronically Controlled, Variable Ignition Timing: For exact ignition advance control at all throttle positions and RPMs.
  • Direct Ignition: For more efficient combustion.
The Jet Pump Propulsion System
  • The FZS 155mm hyper-flow jet pump propulsion system with three-blade stainless steel impeller is designed to maximize water flow for high performance. The FZR pump configuration provides excellent hook-up and smooth acceleration.
  • The industry's only Reverse with Traction Control technology:Maintains the perfect RPM to provide the optimal speed for effectively maneuvering when the watercraft is in reverse.
  • Quick Shift Trim System (Q.S.T.S.): Mechanically operated, this system offers instant change in the attitude of the watercraft while underway allowing for tighter turns or quicker acceleration on plane, as the rider prefers. Q.S.T.S. offers 24 degrees of total trim range.
  • Stainless Steel Impeller Housing Liner: For high durability, the liner maintains accurate clearance tolerances between the impeller and the housing.
  • High Flow Intake Duct and Grate: The dynamic shape of these items directs water flow into the pump for better thrust, performance and hook up.
  • Pumps are Manufactured with YDC30: A combination of zinc and copper alloys, developed by Yamaha marine engineers, that offers excellent corrosion protection.

The NanoXcel Hull and Deck
  • The FZS features the world's first hulls and decks manufactured through the use of cutting edge nanotechnology. Yamaha's new NanoXcel ultra-lightweight, high strength material reduces the weight of the hull, deck and liner by 25% and provides performance gains in acceleration, top speed and performance-driven handling. Additionally, the NanoXcel material offers a shinier, gem-like finish which reduces surface tension on the water, providing a more nimble, responsive ride.
  • All New Performance-Enhanced Hull: Provide excellent agility and maneuverability.
  • Sponson Design: Provides added straight-line comfort and an improved two and three-up riding experience.
Additional Features
  • Telescopic Steering: Three variable positions designed to give the driver the option of standup riding, traditional sit-down riding or low to get even closer to the action.
  • Dual Analog Meters: Provides the operator a quick read on speed, RPM, fuel level, low fuel warning, low oil pressure warning, battery voltage, overheat warning, hour meter, check engine light with self-diagnostic function and the industry's only audible warning system.
  • Industry's First Remote Controlled Transmitter: With the touch of a button on Yamaha's innovative remote controlled transmitter, you can activate and deactivate the FZS's digital security system and Low RPM Mode from up to 30 feet away.
  • Low RPM Mode?: The personal watercraft industry's first fuel saving feature, Low RPM can reduce fuel consumption by up to 26% based on average annual use.
  • Yamaha Security System: This security system that can be activated with the touch of a button ensures that no one starts the FZS without your permission.
  • 21.3 Gallons of Total Storage: Includes a large, watertight storage compartent under the seat and the glove box.
  • Extra Large Boarding Platform with Retractable Reboarding Step:Provides a stable area for reboarding.
  • Dual Mirrors: Automotive style and convenience.
  • Finger Throttle Lever: Provides added comfort while reducing hand fatigue.
  • Yamaha's Trademarked Visibility Spout®: A waterspout from the rear of the craft that improves the watercraft's conspicuity.

To Know More Yamaha FZS Dealer India 







Yamaha  FX  Cruiser  SHO


Standard Features

The Powerplant
  • The FX Cruiser SHO is powered by a 1.8 liter, supercharged, super high output Yamaha Marine Engine.
    This 1812cc engine, which is purpose-built for the marine environment, is the largest displacement engine ever installed in a personal watercraft. It is also the only engine in the high-performance, four-stroke category optimized to run on the least expensive Regular Unleaded fuel.

  • Electronic Fuel Injection (EFI):
    Throttle position sensor (TPS) and intake air pressure and air temperature sensors supply the optimum air/fuel mixture. The results are a smooth, high power output with low fuel consumption and low exhaust emissions.

  • Specially Designed, One-piece Cylinder and Crankcase Assembly:
    Provides tremendous engine rigidity that's lighter and stiffer than two-piece designs.

  • Slant Detection Switch:
    Electronic switch stops engine and oil pumps immediately if watercraft becomes overturned, protecting motor from unwanted water ingestion.

  • High Volume Intake Box:
    With water repellent air filter and flame arrestors.

  • SAWS (Scavenger Assist Wet Sump)
    Equipped with a high-performance, compact gas-liquid separator, this engine uses Yamaha's unique ultra compact lubrication system and the oil pan structure.

  • Corrosion Protection System:
    Sacrificial zinc anodes protect the engine from harmful galvanic corrosion. Stainless steel fasteners (nuts, bolts, hardware) provide a long service life. Cylinders, cases and heads are all treated with a durable oxide coating to form a barrier between corrosion and expensive engine parts.

  • Electronically Controlled, Variable Ignition Timing:
    For exact ignition advance control at all throttle positions and RPMs.

  • Direct Ignition:
    For more efficient combustion.
The Jet Pump Propulsion System
  • The FX Cruiser SHO's 155mm hyper-flow jet pump propulsion system:
    The three-blade stainless steel impeller is designed to maximize water flow for high performance. The FX Cruiser SHO pump configuration provides excellent hook-up and smooth acceleration.

  • The industry's only Reverse with Traction Control technology:
    Maintains the perfect RPM to provide the optimal speed for effectively maneuvering when the watercraft is in reverse.

  • Quick Shift Trim System (Q.S.T.S.): 
    Mechanically operated, this system offers instant change in the attitude of the watercraft while underway allowing for tighter turns or quicker acceleration on plane, as the rider prefers. Q.S.T.S. offers 24 degrees of total trim range.

  • Stainless Steel Impeller Housing Liner:
    For high durability, the liner maintains accurate clearance tolerances between the impeller and the housing.

  • High Flow Intake Duct and Grate:
    The dynamic shape of these items directs water flow into the pump for better thrust, performance and hook up.

  • Pumps are Manufactured with YDC30:
    A combination of zinc and copper alloys, developed by Yamaha marine engineers, that offers excellent corrosion protection.

The NanoXcel Hull and Deck:
  • The FX Cruiser SHO features the world's first hulls and decks manufactured through the use of cutting edge nanotechnology.
    Yamaha's NanoXcel ultra-lightweight, high strength material reduces the weight of the hull, deck and liner by 25% and provides performance gains in acceleration, fuel savings, top speed and handling. Additionally, the NanoXcel material offers a shinier, gem-like finish which reduces surface tension on the water, providing a more nimble, responsive ride.

  • Progressive, Stepper Draft V-Hull with Integrated Bow Spray Guard:
    Provides excellent maneuverability, handling and comfort.

  • Sponson Design:
    Provides added straight-line comfort and an improved two-up and three-up riding experience.
Additional Features:
  • Yamaha's exclusive Cruise Assist:
    The industry's first system that allows the driver to set and hold a particular engine speed while maintaining a comfortable riding position with the throttle. Once the speed is set, the driver can increase or decrease the speed through the simple push of a button. When the throttle is disengaged the system shuts off.

  • Yamaha's No Wake Mode:
    Makes cruising through no-wake zones a breeze. Once engaged, the no-wake mode moves the engine's RPMs to an optimal speed, approximately 5 mph, for efficiently navigating through a no-wake zone. Once through, the driver simply applies throttle and the no-wake mode is released.

  • Yamaha Cruiser® Seat:
    Yamaha's innovative Cruiser® seat provides excellent comfort for the driver and passengers.

  • Four-step Adjustable Tilt Steering System:
    Allows the rider to adjust the steering column angle from 55 degrees to 35 degrees.

  • Multi-function Electronic Information Center:
    Provides the operator a quick read on speed, RPM, fuel level, low fuel warning, low oil pressure warning, battery voltage, overheat warning, hour meter, check engine light with self-diagnostic function and the industry's only audible warning system.

  • Industry's first and only Fuel flow meter:
    Provides the operator with gallons per hour and gallons per mile

  • Industry's First Remote Controlled Transmitter:
    With the touch of a button on Yamaha's innovative remote controlled transmitter, you can activate and deactivate the FX Cruiser SHO's digital security system and Low RPM Mode from up to 30 feet away.

  • Yamaha Security System:This security system that can be activated with the touch of a button ensures that no one starts the FX Cruiser SHO without your permission.

  • 26 Gallons of Total Storage:
    Including a glove box and watertight storage on the dash.

  • Extra Large Boarding Platform with Retractable Reboarding Step:Provides a stable area for reboarding.

  • Dual Mirrors:
    Automotive style and convenience.

  • Finger Throttle Lever: Provides added comfort while reducing hand fatigue.

  • Yamaha's Trademarked Visibility Spout®: A waterspout from the rear of the craft that improves the watercraft's conspicuity.








Yamaha  VXS


Standard Features

The Powerplant
  • The Yamaha VXS is powered by a 1.8 liter high output Yamaha Marine Engine.
    This 1812cc engine, which is purpose-built for the marine environment, is the largest displacement engine ever installed in a personal watercraft. It is also the only engine in the high-performance, four-stroke category optimized to run on the least expensive Regular Unleaded fuel.

  • Electronic Fuel Injection (EFI):
    Throttle position sensor (TPS), intake air pressure and air temperature sensors supply the optimum air/fuel mixture. The results are a smooth, high power output with low fuel consumption and low exhaust emissions.

  • Specially Designed, One-piece Cylinder and Crankcase Assembly:
    Provides tremendous engine rigidity that's lighter and stiffer than two-piece designs.

  • Slant Detection Switch:
    Electronic switch stops engine and oil pumps immediately if watercraft becomes overturned, protecting motor from unwanted water ingestion.

  • High Volume Intake Box:
    With water repellent air filter and flame arrestors.

  • SAWS (Scavenger Assist Wet Sump):
    Equipped with a high-performance, compact gas-liquid separator, this engine uses Yamaha's unique ultra compact lubrication system and oil pan structure.

  • Corrosion Protection System:
    Sacrificial zinc anodes protect the engine from harmful galvanic corrosion. Stainless steel fasteners (nuts, bolts, hardware) provide a long service life. Cylinders, cases and heads are all treated with a durable oxide coating to form a barrier between corrosion and expensive engine parts.

  • Electronically Controlled, Variable Ignition Timing:
    For exact ignition advance control at all throttle positions and RPMs.

  • Direct Ignition:
    For more efficient combustion.
The Jet Pump Propulsion System
  • The Yamaha VXS’s 155mm hyper-flow jet pump propulsion system with three-blade stainless steel impeller:
    Designed to maximize water flow for high performance. The VXS’s pump configuration provides excellent hook-up and smooth acceleration.

  • Stainless Steel Impeller Housing Liner:
    For high durability, the liner maintains accurate clearance tolerances between the impeller and the housing.

  • High Flow Intake Duct and Grate:
    The dynamic shape of these items directs water flow into the pump for better thrust, performance and hook up.

  • Pumps are Manufactured with YDC30:
    A combination of zinc and copper alloys, developed by Yamaha marine engineers, that offers excellent corrosion protection.
The NanoXcel Hull and Deck
  • The Yamaha VXS features the world’s first hulls and decks manufactured through the use of cutting edge nanotechnology.
    Yamaha’s NanoXcel ultra-lightweight, high strength material reduces the weight of the hull, deck and liner by 25% and provides performance gains in acceleration, fuel reduction, top speed and handling. Additionally, the NanoXcel material offers a shinier, gem-like finish which reduces surface tension on the water, providing a more nimble, responsive ride.

  • Progressive, Stepped Draft V-Hull with Integrated Bow Spray Guard:
    Provides excellent maneuverability, handling and comfort.

  • Performance Sponson Design:
    Provides added straight-line comfort and an improved two-up and three-up riding experience.
Additional Features:
  • Multi-function Electronic Information Center:
    Provides the operator a quick read on speed, RPM, fuel level, low fuel warning, low oil pressure warning, overheat warning, hour meter, check engine light with self diagnostic function.

  • Industry's First Remote Controlled Transmitter:
    With the touch of a button on Yamaha's innovative remote-controlled transmitter, you can activate and deactivate the VXS’s digital security system and Low RPM Mode from up to 30 feet away.

  • Low RPM Mode™:
    The personal watercraft industry’s first fuel saving feature, Low RPM can reduce fuel consumption by up to 26% based on average annual use.

  • Yamaha Security System:
    This security system that can be activated with the touch of a button ensures that no one starts the VXS without your permission.

  • Dual Concave Mirrors:
    Automotive style and convenience.

  • 15 Gallons of Total Storage:
    Includes a large bow storage locker and glove box.

  • Comfortable One-piece Seat:
    Ergonomically-designed and contoured for added support. The extra-long seat is easily removed for quick access to the engine compartment.

  • Extra Large Boarding Platform:
    Provides a stable platform for reboarding.

  • Finger Throttle Lever:
    Provides added comfort while reducing hand fatigue.

  • Yamaha's Trademarked Visibility Spout®:
    A waterspout from the rear of the craft that improves the watercraft's conspicuity.

To Know More Yamaha VXS Dealer India 








Yamaha  VX  Deluxe


Standard Features

The Powerplant
  • The VX Deluxe is powered by a Yamaha MR-1® four-stroke engine.
    This is a compact, ultra-lightweight, four-cylinder, 1052cc, DOHC, 20-valve, liquid-cooled engine for class-leading performance.

  • Electronic Fuel Injection (EFI):
    Delivers smooth, high power output with low fuel consumption and low exhaust emissions.

  • Specially Designed, One-piece Cylinder and Crankcase Assembly:
    Provides tremendous engine rigidity that's lighter and stiffer than two-piece designs.

  • Slant Detection Switch: 
    Electronic switch stops engine and oil pumps immediately if watercraft becomes overturned, protecting motor from water ingestion.

  • Dry Sump Lubrication: 
    Uses two engine oil pumps to deliver lubricating oil to each moving part with water-jacketed sump and oil backflow protection.

  • Corrosion Protection System:
    Sacrificial zinc anodes protect the engine from harmful galvanic corrosion. Stainless steel fasteners (nuts, bolts, hardware) provide a long service life.

  • Electronically Controlled, Variable Ignition Timing:
    For exact ignition advance control at all throttle positions and RPMs.

  • Electronically Controlled, Variable Ignition Timing:
    For exact ignition advance control at all throttle positions and RPMs.
The Jet Pump Propulsion System
  • The VX pump design: One of the most efficient pump configuration ever,
    increasing stream velocity and thrust while decreasing cavitation and prop spin.

  • Reverse: 
    Allows the watercraft to be backed up off a trailer or out of tight spots where you cannot turn around easily.

  • Stainless Steel Impeller Housing Liner:
    For high durability, the liner maintains accurate clearance tolerances between the impeller and the housing.

  • High Flow Intake Duct and Grate:
    The dynamic shape of these items directs water flow into the pump for better thrust, performance and hook up.

  • Cooling Water Intake Filter:
    Filters out harmful debris that could cause blockage of important cooling water passages.

  • Pumps are Manufactured with YDC30: A combination of zinc and copper alloys, developed by Yamaha marine engineers, that offers excellent corrosion protection.
The Ultra-Lightweight, High Strength Hull and Deck
  • The VX Deluxe hull : Designed to be light and strong.

  • Progressive, Stepper Draft V-Hull with Integrated Bow Spray Guard: 
    Provides excellent maneuverability, handling and comfort.

  • Performance Sponson Design:
    Provides added straight-line comfort and an improved two-up and three-up riding experience.
Additional Features:
  • Multi-function Electronic Information Center:Provides the operator a quick read on speed, RPM, fuel level, low fuel warning, low oil pressure warning, overheat warning, hour meter, check engine light with self diagnostic function.

  • Industry's First Remote Controlled Transmitter:
    With the touch of a button on Yamaha's innovative remote-controlled transmitter, you can activate and deactivate the VX digital security system and Low RPM Mode from up to 30 feet away.

  • Low RPM Mode?:
    The personal watercraft industry's first fuel saving feature, Low RPM can reduce fuel consumption by up to 26% based on average annual use.

  • Yamaha Security System:
    This security system that can be activated with the touch of a button ensures that no one starts the VX Deluxe without your permission.

  • Dual Concave Mirrors:
    Automotive style and convenience.

  • 15 Gallons of Total Storage:
    Includes a large bow storage locker and glove box.

  • Comfortable One-piece Seat: 
    Ergonomically-designed and contoured for added support. The extra-long seat is easily removed for quick access to the engine compartment.

  • Extra Large Boarding Platform:
    Provides a stable platform for reboarding.

  • Glove Box with Insulated Beverage Holders.

  • Finger Throttle Lever:
    Provides added comfort while reducing hand fatigue.

  • Yamaha's Trademarked Visibility Spout®:
    A waterspout from the rear of the craft that improves the watercraft's conspicuity.







Yamaha  FZR


Standard Features

The Powerplant
  • The FZR is powered by a 1.8 liter, supercharged, super high output Yamaha Marine Engine. This 1812cc engine, which is purpose-built for the marine environment, is the largest displacement engine ever installed in a personal watercraft. It is also the only engine in the high-performance, four-stroke category optimized to run on the least expensive Regular Unleaded fuel.
  • Electronic Fuel Injection (EFI): Throttle position sensor (TPS) and intake air pressure and air temperature sensors supply the optimum air/fuel mixture. The results are a smooth, high power output with low fuel consumption and low exhaust emissions.
  • Specially Designed, One-piece Cylinder and Crankcase Assembly:Provides tremendous engine rigidity that's lighter and stiffer than two-piece designs.
  • Slant Detection Switch: Electronic switch stops engine and oil pumps immediately if watercraft becomes overturned, protecting motor from unwanted water ingestion.
  • High Volume Intake Box: With water repellent air filter and flame arrestors.
  • SAWS (Scavenger Assist Wet Sump) Equipped with a high-performance, compact gas-liquid separator, this engine uses Yamaha's unique ultra compact lubrication system and the oil pan structure.
  • Corrosion Protection System: Sacrificial zinc anodes protect the engine from harmful galvanic corrosion. Stainless steel fasteners (nuts, bolts, hardware) provide a long service life. Cylinders, cases and heads are all treated with a durable oxide coating to form a barrier between corrosion and expensive engine parts.
  • Electronically Controlled, Variable Ignition Timing: For exact ignition advance control at all throttle positions and RPMs.
  • Direct Ignition: For more efficient combustion.
The Jet Pump Propulsion System
  • The FZR's 155mm hyper-flow jet pump propulsion system with three-blade stainless steel impeller is designed to maximize water flow for high performance. The FZR pump configuration provides excellent hook-up and smooth acceleration.
  • The industry's only Reverse with Traction Control technology:Maintains the perfect RPM to provide the optimal speed for effectively maneuvering when the watercraft is in reverse.
  • Quick Shift Trim System (Q.S.T.S.): Mechanically operated, this system offers instant change in the attitude of the watercraft while underway allowing for tighter turns or quicker acceleration on plane, as the rider prefers. Q.S.T.S. offers 24 degrees of total trim range.
  • Stainless Steel Impeller Housing Liner: For high durability, the liner maintains accurate clearance tolerances between the impeller and the housing.
  • High Flow Intake Duct and Grate: The dynamic shape of these items directs water flow into the pump for better thrust, performance and hook up.
  • Pumps are Manufactured with YDC30: A combination of zinc and copper alloys, developed by Yamaha marine engineers, that offers excellent corrosion protection.
The NanoXcel Hull and Deck
  • The FZR features the world's first hulls and decks manufactured through the use of cutting edge nanotechnology. Yamaha's NanoXcel ultra-lightweight, high strength material reduces the weight of the hull, deck and liner by 25% and provides performance gains in acceleration, top speed and performance-driven handling. Additionally, the NanoXcel material offers a shinier, gem-like finish which reduces surface tension on the water, providing a more nimble, responsive ride.
  • All New Performance-Enhanced Hull: Provides excellent agility and maneuverability.
  • Sponson Design: Provides added straight-line comfort and an improved two and three-up riding experience.
Additional Features
  • Telescopic Steering: Three variable positions designed to give the driver the option of standup riding, traditional sit-down riding or low to get even closer to the action.
  • Racing-Inspired Fastback Seat: Accommodates up to two people for a performance-driven ride.
  • Dual Analog Meters: Provides the operator a quick read on speed, RPM, fuel level, low fuel warning, low oil pressure warning, battery voltage, overheat warning, hour meter, check engine light with self-diagnostic function and the industry's only audible warning system.
  • Industry's First Remote Controlled Transmitter: With the touch of a button on Yamaha's innovative remote controlled transmitter, you can activate and deactivate the FZR's digital security system and Low RPM Mode from up to 30 feet away.
  • Low RPM Mode?: The personal watercraft industry's first fuel saving feature, Low RPM can reduce fuel consumption by up to 26% based on average annual use.
  • Yamaha Security System: This security system that can be activated with the touch of a button ensures that no one starts the FZR without your permission.
  • Extra Large Boarding Platform with Retractable Reboarding Step:Provides a stable area for reboarding.
  • 21.3 Gallons of Total Storage: Includes a large, watertight storage compartment under the seat.
  • Dual Mirrors: Automotive style and convenience.
  • Finger Throttle Lever: Provides added comfort while reducing hand fatigue.
  • Yamaha's Trademarked Visibility Spout®: A waterspout from the rear of the craft that improves the watercraft's conspicuity.

To Know More Yamaha FZR Dealer India